Rust Instrument Control with USB

where PyVISA can’t reach

circuit4u
4 min readApr 2, 2023

The standard way to remote control or gather data from digital oscilloscope, DMM, signal generator, etc., is through GPIB/LAN/serial port at the back of these instruments, making connection to the PC.

Once the hardware cable is connected, at software level, you need to install some quite large VISA runtime/library. Lastly, you send SCPI commands, which consists of ASCII based text commands, to control the underlying instruments. LabView was the major platform/environment to send these ASCII strings. Nowadays Python through PyVISA provides nice wrapper for SCPI commands as well.

At this point, the only piece of documentation you need to look into, is a manual of all the SCPI commands (all ASCII strings) that your instrument implements. Here are a few examples of these programming manuals:

  • OWON XDG AWG Programmer Manual (link)
  • Rigol DM3058E DMM Programming Guide (link)
  • Siglent SDS1204X-E Oscilloscope Programming Guide (link)
  • Rigol DP832A Power Supply Programming Guide (link)
  • OWON HDS272S Handheld Scope + Waveform Generator SCPI Manual (link)
  • UNI-T UTG962E AWG Programming Guide (link)

(a more detailed explanation: the hardware/software stack of VISA from this link)

You may notice that we focus mainly on cheap Chinese brand instruments, such as Rigol, Siglent, OWON…

--

--

circuit4u
circuit4u

Written by circuit4u

memento of electronics and fun exploration for my future self

No responses yet